Water-based emulsion dispersants for elastic flooring are widely used. We can provide various types of products based on customers’ needs, such as fiber reinforced, wet set, PSA, and transitional PSA products. If overseas users can provide us with their requirements for open time, tack, peel strength, shear strength, etc, we can customize the product accordingly. Attached is a table classifying some popular overseas products. We are able to produce equivalent products.
JG-30 Sheet Vinyl Adhesive
MAIN APPLICATION FIELD:
Water-based solvent-free acrylic co-polymer emulsion flooring adhesive. It is used for adhering various vinyl sheets, with felt backing, foam plastic backing, or dense plastic backing, vinyl tiles and vinyl backed carpets to the leveled substrate in residential、commercial and other industrial buildings.
Product Features
1. The initial tack is high and the newly laid floor is not easy to shift, curl, or warp.
2. Excellent bonding force and extremely high final bonding strengths.
3. Ready to use, easy to use, large coverage.
4. It is non-toxic and harmless, has no irritating smell and is a green and environmentally friendly product.
TECHNICAL DATA:
| Color | White or off-white |
|---|---|
| Main components | Poly-acrylate |
| Storage period | 12 months |
| PH value | 7-8 |
| Frost resistance | Up to 0℃ |
| Consumption | Approx. 250g-350g/㎡ |
| Coverage | Approx. 70-85 m2/25kg |
| Air time on absorbent substrate | Approx. 10-20 minutes |
| Working time on absorbent substrate | Approx. 40-50 minutes |
| Wait time for walk | 24-48 hours later |
| Time to reach final strength | Approx. 72 hours |
Packaging
Net weight 25kg Pail
Product Standards
JG-30 meets JC/T 550-2019 and EN14259-2003
Installation method
- Stir evenly before use and applythe adhesive evenly on the leveled substrate with an A2 notched trowel. Depending on the ambient temperature and humidity in the job site, after leaving it flash for 10-20 minutes, you can apply the above-mentioned various flooring materials if you lightly touch the surface of the adhesive ridge with your fingers and feel sticky. The denser the self-leveling cement substrate, the longer it will take to dry. If the self-leveling cement substrate has high strength and density,the adhesive layer can be left to dry until 70 to 80 percent dry before putting the flooring on it.
- Afterlaying the flooring material, use a heavy metal roller to compact the flooring, or use other tools to compact the flooringto eliminate the air bubble under the flooring. This elimination can make the bonding more secure.
- When laying the floor, please refer to the relevant installationguidefrom the flooring supplier. The sheet flooring laid should be flat and undamaged.
- The installationtemperature shall not be below5℃.
Substrate treatment
- The substratemust be structurally sound, solid, dry, free from active cracks, clean and free from all contaminants such as grease, oil, paint, wax, curing and sealing compounds that would impair adhesion.
- It is recommended to apply a layer of multifunctional primerto the substrate that has high porosity, low strength and high water absorption.
- For uneven substrate ground, use self-levelingcement to level the substrate.
Precautionary measures
- Ensure optimumtemperature and humidity conditions for installationand ventilation. Low temperature and high humidity will prolong drying time and delay bond strength development.
- This product should be protected from severe freezingand strong sunlight during transportation, storage and installation.
Environmental Protection:
This product is a green and environmentally friendly product, containing no formaldehyde, halide, or heavy metals such as lead, mercury. It is safe, non-toxic, and harmless.
JG-70 Universal Vinyl Flooring Adhesive
MAIN APPLICATION FIELD:
High-performance dispersion adhesive, suitable for indoor bonding of homogeneous or heterogeneous PVC sheets, stone-plastic tiles, foam-backed vinyl flooring and also bonding on the non-absorbent sub-floor such as ceramic tiles or epoxy flooring. It has large coverage, excellent bonding force and extremely high final bonding strength, and its performance is reliable. It can be used for adhesion of resilient flooring above hot water pipe underground heating system.
Product Features
JG-70 Universal PVC flooring adhesive is a multipurpose flooring adhesive that can be used for a variety of vinyl sheets and tiles, It is suitable to be used on both absorbent substrates such as self-leveling underlayments and non-absorbent substrates for example ceramic tiles, terrazzo, or epoxy-coated sub-floor.
TECHNICAL DATA:
| Color | White or off-white |
|---|---|
| Main components | Synthetic resin |
| Storage time | 12 months |
| PH value | 7 |
| Frost resistance | Up to 0℃ |
| Coverage | 80-90 ㎡ / 20kg (A1 trowel） |
| Air time, Wet bonding on absorbent substrate | 10-15 minutes |
| Air time, Pressure sensitive bonding on non-absorbent substrate | 90 minutes |
| Working time, Wet bonding on absorbent substrate | 50-60 minutes |
| Working time, Pressure sensitive bonding on non-absorbent substrate | 120 minutes |
| Time required to reach final strength | Approx. 72 hours |
Package
Net weight 20kg pail
Product Standard
JG-70 meets JC/T 550-2019 and EN14259-2003
Installation method
- Stir evenly before use, and apply the adhesive with A1 or A2 notched trowlsevenly onto the treated substrate （A1 is recommended for smooth and even substrates , only use A2 for the uneven substrate with very rough surface or without self-leveling cement applied to the substrate).
- Use the wet setmethod on the absorbent substrate: Use the A1 trowl to spread the adhesive, let it flash for 10-15 minutes. When the adhesive film is still wet (touch the adhesive film lightly with your fingers, feel tacky and adhesive will also reach onto your fingers), you can begin to install the flooring. The above mentioned flooring can be laid within 120 minutes. After laying the floor, use a heavy metal roller to compact the floor, or use other tools to compact the floor to eliminate the air bubble underneath the flooring in order to transfer the adhesive to the backing of the flooring.
- On dense and non-absorbent sub-floor, such as ceramic tilesor epoxy coated sub-floor, bond the PVC flooring with the pressure-sensitive method: Let the adhesive dry for 60 minutes, and then bond the flooring to the sub-floor after the adhesive film is surface-dry. The working time is 180 minutes. After laying the flooring, use a heavy metal roller to compact the flooring, or use other tools to compact the flooring to eliminate the air bubble under the flooring. This elimination can make the bonding more secure.
- The indoorroom temperature should not be below 5℃ and the indoor air humidity should not be above 80%.
Precautionary measures
- Ensure optimum temperature and humidity conditions for installation and ventilation. Low temperature and high humidity will prolong drying time and delay bond strength development.
- This product should be protected from severe freezing and strong sunlight during transportation, storage and installation.
Coverage
Approximately 4 -4.5 square meters per kilogram can be achieved on the polished self-leveling underlayment with an A1 trowel.
Environmental Protection:
This product is a green and environmentally friendly product, containing no formaldehyde, halide, or heavy metals such as lead, mercury. It is safe, non-toxic, and harmless.
JG-80 Turbo Vinyl Flooring Adhesive
MAIN APPLICATION FIELD:
High-performance water-based dispersion adhesive, suitable for indoor bonding of homogeneous or heterogeneous PVC sheets, stone-plastic tiles, foam-backed vinyl flooring, adhesion of PVC flooring onto the wall. It can also be used to bond on the non-absorbent sub-floor such as ceramic tiles. It has excellent bonding force and extremely high final bonding strength, and its performance is reliable. It can be used for adhesion of resilient flooring above hot water pipe underground heating system. On substrates that have not been leveled by covering a layer of self leveling cement, but not severely rough, deeper trowels such as A2 can also be used to bond to the above types of flooring. On even and leveled substrate, A1 trowel will do a good job.
Product Features:
JG-80 Turbo Adhesive is a water-based adhesive that can be used for a variety of homogeneous or heterogeneous PVC sheets and tiles. It can also be used on ceramic tiles, terrazzo, and other non absorbent substrates.
TECHNICAL DATA:
| color | White or off-white |
|---|---|
| Main components | Synthetic resin |
| Storage period | 12 months |
| PH value | 7 |
| Frost resistance | Up to 0℃ |
| Coverage | 80-90 ㎡/20kg (A1 trowel） |
| Air time, Wet bonding on absorbent substrate | 10-15 minutes |
| Air time, Pressure sensitive bonding on non-absorbent substrate | 60 minutes |
| Working time, Wet bonding on absorbent substrate | 90 minutes |
| Working time, Pressure sensitive bonding on non-absorbent substrate | 120 minutes |
| Time required to reach final strength | Approx. 72 hours |
Package
Net weight 20kg pail
Product Standard
JG-80 meets JC/T 550-2019 and EN14259-2003
Installation method
- Stir evenly before use, and apply the adhesive with A1 or A2 notched trowelevenly onto the treatedsubstrate.
- On absorbent floors such as self-leveling underlayment, bond all types of flooring using the semi-wet method after polishingthe underlayment and eliminating the dust. This means that after the adhesive has air-dried for 10-15 minutes, the adhesive film is semi- wet, and you can finger touch the adhesive surface and feel tacky, the adhesive also sticks onto your finger, you can begin to lay the flooring material. After installation, use a heavy metal roller to compact the flooring, or use other tools to compact the flooring to eliminate the air bubble underneath the flooring. The working time is 90 minutes.
- On denseandnon-absorbent sub-floor,such as ceramic tiles or epoxy sub-floor, bond the PVC flooring with the pressure-sensitive method: Let the adhesive dry for 60 minutes, and then bond the flooring to the sub-floor after the adhesive film is surface dry. After laying the flooring, use a heavy metal roller to compact the flooring, or use other tools to compact the flooring to eliminate the air bubble under the flooring.The working time is 120 minutes.
- Use the contact bonding method for bonding skirting. This means that the adhesive isto beapplied both on the back of the piece of flooring and on the wall substrate. Wait for both sides to be dry, press the piece of the flooring onto the wall then compact the piece of the flooring.
- The indoortemperatureshould not be below 5℃and the air humidity should not be above 80%.
Precautionary measures
- Ensure optimum temperature and humidity conditions for installation and ventilation. Low temperature and high humidity will prolong drying time and delay bond strength development.
- This product should be protected from severe freezing and strong sunlight during transportation, storage and installation.
Coverage
On the polished self-leveling underlayment , an A1 trowel can be used to cover about 4-4.5 square meter area per kilogram of adhesive. On ceramic tiles, an A1 trowel can be used to cover about 5-6 square meter area per kilogram.
Environmental Protection:
This product is a green and environmentally friendly one. It does not contain formaldehyde, halide or heavy metals such as lead, mercury, etc. It is safe and non-toxic and is a non-dangerous product.
JG-100 Super-turbo Resilient Flooring Adhesive
MAIN APPLICATION FIELD:
This high-performance dispersion one-component adhesive is suitable for indoor bonding of homogeneous or heterogeneous PVC sheets, industrial PVC flooring, vinyl quartz flooring, and dimensionally stable flat-backed rubber sheets (with a thickness of less than 2.5 mm). It offers excellent peel strength, extremely high shear strength, and reliable performance. It can be used for adhesion of resilient flooring above hot water pipe underground heating system.
Product Characteristics:
JG-100 Super-turbo Resilient Flooring Adhesive is a super capable resilient flooring adhesive suitable for bonding PVC sheets, tiles and rubber flooring with thickness less than 2.5mm. It is suitable for bonding flooring on absorbent substrates such as self-leveling and non-absorbent substrates such as ceramic tiles. Its shear strength is significantly higher than ordinary single-component flooring adhesives, so its suitable for installing PVC industrial flooring and dimensionally stable rubber flooring with a thickness of 2.5 mm or less.
TECHNICAL DATA:
| color | White or off-white |
|---|---|
| Main components | Synthetic resin |
| Storage period | 12 months |
| PH value | 7 |
| Frost resistance | Up To 0℃ |
| Coverage | 66㎡(A3 trowel), 70㎡(A2 trowel) and 80㎡(A1 trowel) per/20kg |
| Air time, Wet bonding on absorbent substrate | 10-15 minutes |
| Air time, Pressure sensitive bonding on non-absorbent substrate | 30-60 minutes |
| Working time, Wet bonding on absorbent substrate | 50 minutes |
| Working time, Pressure sensitive bonding on non-absorbent substrate | 60-100 minutes |
| Time required to reach final strength | Approx. 7 days |
Package
Net weight 20kg pail
Product Standard
JG-100 meets JC/T 550-2019 and EN14259-2003
Installation method
- Stir evenly before use, and apply the adhesive with A1 or A2 notched trowel evenly to the treated substrate (A1 is recommended for vinyl flooring on even substrates, A2 or A3 are to be used when installing industrial PVC flooring or rubber floors with stable dimensions and thickness below 2.5 mm ).
- Use the semi-wetsetmethod on the absorbent substrate. Let the adhesive film to flash for 10 minutes. When the adhesive film is semi-dry and tacky (touch the adhesive film lightly with your fingers, feel tacky and adhesive will also reach onto your fingers), you can begin to install the flooring. The above mentioned flooring materials can be laid within 50-60 minutes. After laying the flooring material, use a heavy metal roller to compact the flooring, or use other tools to compact the flooring to eliminate the air bubbles underneath the flooring in order to transfer the adhesive to the back of the flooring.
- On denseandnon-absorbent sub-floor ,such as ceramic tiles or epoxy coated sub-floor, bond the PVC flooring materials with the pressure-sensitive method: Let the adhesive dry for 60 minutes, and then bond the flooring to the sub-floor after the adhesive film is surface-dry. The working time is 60 minutes. After laying the flooring, use a heavy metal roller to compact the flooring, or use other tools to compact the flooring to eliminate the air bubbles under the floor. (Pressure sensitive method cannot be used for installing rubber flooring).
4.The indoor temperature shall not be below 5℃, and the humidity shall not exceed 80%. When applying rubber flooring, the temperature shall not be lower than 15 degrees, and the humidity shall be below 75%.
Precautionary Measures:
- Ensure optimum temperature and humidity conditions for installation and ventilation. Low temperature and high humidity will prolong drying time and delay bond strength development.
- This product should be protected from severe freezing and strong sunlight during transportation, storage and installation.
Environmental Protection:
This product is a green and environmentally friendly product, containing no formaldehyde, halide, or heavy metals such as lead, mercury. It is safe, non-toxic, and harmless.