TECHNICAL DATA:
| Color | White or off-white |
|---|---|
| Main components | Poly-acrylate |
| Storage period | 12 months |
| PH value | 7-8 |
| Frost resistance | Up to 0℃ |
| Consumption | Approx. 250g-350g/㎡ |
| Coverage | Approx. 70-85 m2/25kg |
| Air time on absorbent substrate | Approx. 10-20 minutes |
| Working time on absorbent substrate | Approx. 40-50 minutes |
| Wait time for walk | 24-48 hours later |
| Time to reach final strength | Approx. 72 hours |
Packaging
Net weight 25kg Pail
Product Standards
FG-30 meets JC/T 550-2019 and EN14259-2003
Installation method
- Stir evenly before use and applythe adhesive evenly on the leveled substrate with an A2 notched trowel. Depending on the ambient temperature and humidity in the job site, after leaving it flash for 10-20 minutes, you can apply the above-mentioned various flooring materials if you lightly touch the surface of the adhesive ridge with your fingers and feel sticky. The denser the self-leveling cement substrate, the longer it will take to dry. If the self-leveling cement substrate has high strength and density,the adhesive layer can be left to dry until 70 to 80 percent dry before putting the flooring on it.
- Afterlaying the flooring material, use a heavy metal roller to compact the flooring, or use other tools to compact the flooringto eliminate the air bubble under the flooring. This elimination can make the bonding more secure.
- When laying the floor, please refer to the relevant installationguidefrom the flooring supplier. The sheet flooring laid should be flat and undamaged.
- The installationtemperature shall not be below5℃.
Substrate treatment
- The substratemust be structurally sound, solid, dry, free from active cracks, clean and free from all contaminants such as grease, oil, paint, wax, curing and sealing compounds that would impair adhesion.
- It is recommended to apply a layer of multifunctional primerto the substrate that has high porosity, low strength and high water absorption.
- For uneven substrate ground, use self-levelingcement to level the substrate.
Precautionary measures
- Ensure optimumtemperature and humidity conditions for installationand ventilation. Low temperature and high humidity will prolong drying time and delay bond strength development.
- This product should be protected from severe freezingand strong sunlight during transportation, storage and installation.
Environmental Protection:
This product is a green and environmentally friendly product, containing no formaldehyde, halide, or heavy metals such as lead, mercury. It is safe, non-toxic, and harmless.
Reviews
There are no reviews yet.